Welcome Guest! To enable all features please Login or Register.
Go to last post Go to first unread
#1 Posted : Tuesday, December 12, 2017 5:27:11 PM(UTC)

Rank: Advanced Member

Groups: Registered
Joined: 3/13/2013(UTC)
Posts: 24

Thanks: 9 times
Has anyone ever thought about connecting the throttle pedal to the injection by other methods besides the cable? The reason I ask this is because I have bad luck with the standard cable either needing constant adjustment and never being right, water getting in the cable and causing it to rust/bind, kinks, etc. If only there were a way to link the pedal via rod to another rotating rod that made the 90* turn and in turn spooled up a much shorter and easier to maintain cable that connected the two while leaving adjustability for the correct throttle pitch at the pedal and room for the engine to move forward or back. Weight savings be damned! I would prefer the extra moving pieces over having to remove the cable every week and pour teflon lube into it.
Mike Dicely  
#2 Posted : Tuesday, December 12, 2017 8:29:48 PM(UTC)
Mike Dicely

Rank: Administration

Groups: Administrator, Pay Per View, Administrators, Registered
Joined: 2/1/2011(UTC)
Posts: 754
United States
Location: Etters, PA

Thanks: 1 times
Was thanked: 133 time(s) in 132 post(s)
That is strange that you are having cable problems. I have not heard of that happening, most replace their cable every 30 races and very little maintenance.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.